Job Listings

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Diesel Engine or Diesel Technology Knowledge or Experience Required Exciting Opportunity for a  Full-Time Trainee Transport Refrigeration Installation Technician Competitive Pay/Full Time/Generous Benefits   We’re hiring a Trainee Transport Refrigeration Installation Technician with diesel experience. Responsibilities include installation, maintenance, and repair of refrigeration units in transport settings. HVAC experience is a plus, but not required as training is provided. The starting wage is $20-$22/hr. After six months, we’ll sponsor your Level 1 certification, raising your wage to $25-$27/hr. Passing the Level 2 exam could further increase your wage to $30/hr.   Responsibilities: - Installing, maintaining, and repairing diesel and refrigeration systems - Identifying maintenance risks on equipment - Diagnosing electrical and mechanical faults - Cleaning, adjusting, and repairing systems, and performing warranty services - Performing emergency repairs promptly and efficiently - Providing technical direction   Qualifications: - Willingness to be trained and tested for National Transport Refrigeration Certification - Experience with or Knowledge of Diesel Engine or Diesel Technology required to be considered for opportunity - Excellent communication skills - Clean driving record   Our Ideal Candidate Would Have: - Experience with troubleshooting Transportation Refrigeration - Holds Level 1 or Level 2 Transportation Refrigeration Licenses   You could be a good fit for this position if you have  experience in any of the following roles: - Transport Refrigeration (Level 1 or Level 2 Certification) - Diesel Mechanic - Engineer Equipment Mechanic - Wheeled Vehicle Mechanic - Marine Machinery Mechanic - Powered Support Systems Mechanic - Express Lube Technician   ***Veterans Are Encouraged to Apply***

Laser Field Service Technician As a Field Service Technician, you will comine your skills within customer service, and the mechanical and electrical knowledge to repair, troubleshoot, modify and test complex technical problems on machining products. Extensive travel within a set geographical area is required and occasional travel throughout North America. The services are provided on-site at our customer’s facilities and via telephone if the situation permits. We train the right people for a successful career in the machinery industry and pride ourselves on employee longevity and customer retention.    

Immediate Need For  Full Time CNC Machinist Monday -Thursday (10hr shifts)    We are looking for a skilled CNC Machinist to join our team.  The machine shop team member will provide the skill and work ethic required to build the components for our world class food processing equipment at the best safety, quality, delivery and cost possible.    Responsibilities - Sets up and effectively operate conventional, special purpose, CNC and Numerical Control (NC) machines and machining centers to fabricate SS and nonmetallic parts - Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements - Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required. - Uses measuring devices such as micrometers and veneer calipers - Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures. Uses tooling such as taps, endmills, drills - Verifies conformance of finished work-piece to specifications, using measuring and inspection tools as necessary. - Troubleshoots problems with minimal or no assistance - Repairs mistakes with minimal or no assistance - Skilled at manufacturing necessary fixturing - Performs other duties as assigned  Qualifications - 5+ of experience in a manufacturing environment - Trade or Technical School Preferred - Capable of effectively operating both Manual and CNC equipment - Both Lathe & Mill experience preferred, but not required - Experience in “Job Shop” type environment - Frequent changeovers are required - Ability to write programs and/or make complex program edits strongly preferred - Ability to read, write, speak, and understand English fluently - Strong verbal, written, and interpersonal skills - Self-motivation and flexibility of job assignments - Shop has various operating platforms including, but not limited to, Mazak, Haas, Okuma, Clausing, Acer and Sharp - Ideal candidate will be willing and able to learn all platforms and move platforms as needed to support business conditions - Ability to read and understand blueprints, drawings - Basic computer skills including ERP transactional experience  Physical Requirements - Crawling around equipment - Standing for long periods of time - Reaching, lifting, and pushing equipment and machine components - Ability to lift minimum 35 pounds ***Veterans Are Encouraged to Apply***

IMMEDIATE NEED for a Full Time Project Engineer     We are looking for a skilled Project Engineer to join our team.  We have seen tremendous growth and need a BSME with CAD and 3D modeling to help our goals.  This position will report to the Engineering Manager.  You will be responsible for the technical aspects of projects to supple large capital food processing equipment to customers.  The Project Engineer acts as the customer's primary technical interface in conjuction with sales, project management, and the service group to ensure equipment meets expecations.  The Project Engineer leads teams of one to five skilled design engineers and provides guidance on component specification, equipment sizing, and detailed design specification. Job Responsibilities  - Design of industrial food processing and packaging equipment models in Autodesk Inventor 3D - Drafting of equipment layout/installation drawings, piping and instrumentation drawings, and process flow diagrams in AutoCAD 2D - Review of customer specifications, commercial documents, and internal standards documentation to determine scope of project supply - Organize and participate in peer review meetings to generate and review Risk Assessments - Sizing of mechanical and powertrain components (shafts, bearings, sprockets, gearboxes) - Sizing of heat transfer and fluid flow components (valves, pumps, burners, Heat Exchangers) - Specification of purchased components (sensors and switches) - Monitor design and customer drawing release schedules to ensure project is not delayed - Support equipment fabrication progress through our factory; we have a full machine shop, sheet metal shop with laser and waterjet, and welding assembly shop - Work with our field service group to support equipment installation, start-up, and commissioning - Mobility as required to review equipment during construction and during commissioning offsite - Occasional travel to customer facilities for meetings and equipment troubleshooting Required Education and Experience - BSME or B.S. in Food Engineering or related engineering field - 3+ years of CAD experience including 3-D modeling and drafting - Knowledge of design and manufacturability (DFM) - Experience in food processing equipment is a plus, but analytical ability is most important. - Experience working in SAP is preferred ***Veterans Are Encouraged to Apply***  

IMMEDIATE NEED for a Full Time Project Engineer     We are looking for a skilled Project Engineer to join our team.  We have seen tremendous growth and need a BSME with CAD and 3D modeling to help our goals.  This position will report to the Engineering Manager.  You will be responsible for the technical aspects of projects to supple large capital food processing equipment to customers.  The Project Engineer acts as the customer's primary technical interface in conjuction with sales, project management, and the service group to ensure equipment meets expecations.  The Project Engineer leads teams of one to five skilled design engineers and provides guidance on component specification, equipment sizing, and detailed design specification. Job Responsibilities  - Design of industrial food processing and packaging equipment models in Autodesk Inventor 3D - Drafting of equipment layout/installation drawings, piping and instrumentation drawings, and process flow diagrams in AutoCAD 2D - Review of customer specifications, commercial documents, and internal standards documentation to determine scope of project supply - Organize and participate in peer review meetings to generate and review Risk Assessments - Sizing of mechanical and powertrain components (shafts, bearings, sprockets, gearboxes) - Sizing of heat transfer and fluid flow components (valves, pumps, burners, Heat Exchangers) - Specification of purchased components (sensors and switches) - Monitor design and customer drawing release schedules to ensure project is not delayed - Support equipment fabrication progress through our factory; we have a full machine shop, sheet metal shop with laser and waterjet, and welding assembly shop - Work with our field service group to support equipment installation, start-up, and commissioning - Mobility as required to review equipment during construction and during commissioning offsite - Occasional travel to customer facilities for meetings and equipment troubleshooting Required Education and Experience - BSME or B.S. in Food Engineering or related engineering field - 3+ years of CAD experience including 3-D modeling and drafting - Knowledge of design and manufacturability (DFM) - Experience in food processing equipment is a plus, but analytical ability is most important. - Experience working in SAP is preferred ***Veterans Are Encouraged to Apply***  

IMMEDIATE NEED for a Full Time Project Engineer     We are looking for a skilled Project Engineer to join our team.  We have seen tremendous growth and need a BSME with CAD and 3D modeling to help our goals.  This position will report to the Engineering Manager.  You will be responsible for the technical aspects of projects to supple large capital food processing equipment to customers.  The Project Engineer acts as the customer's primary technical interface in conjuction with sales, project management, and the service group to ensure equipment meets expecations.  The Project Engineer leads teams of one to five skilled design engineers and provides guidance on component specification, equipment sizing, and detailed design specification. Job Responsibilities  - Design of industrial food processing and packaging equipment models in Autodesk Inventor 3D - Drafting of equipment layout/installation drawings, piping and instrumentation drawings, and process flow diagrams in AutoCAD 2D - Review of customer specifications, commercial documents, and internal standards documentation to determine scope of project supply - Organize and participate in peer review meetings to generate and review Risk Assessments - Sizing of mechanical and powertrain components (shafts, bearings, sprockets, gearboxes) - Sizing of heat transfer and fluid flow components (valves, pumps, burners, Heat Exchangers) - Specification of purchased components (sensors and switches) - Monitor design and customer drawing release schedules to ensure project is not delayed - Support equipment fabrication progress through our factory; we have a full machine shop, sheet metal shop with laser and waterjet, and welding assembly shop - Work with our field service group to support equipment installation, start-up, and commissioning - Mobility as required to review equipment during construction and during commissioning offsite - Occasional travel to customer facilities for meetings and equipment troubleshooting Required Education and Experience - BSME or B.S. in Food Engineering or related engineering field - 3+ years of CAD experience including 3-D modeling and drafting - Knowledge of design and manufacturability (DFM) - Experience in food processing equipment is a plus, but analytical ability is most important. - Experience working in SAP is preferred ***Veterans Are Encouraged to Apply***  

IMMEDIATE NEED for a Full Time Project Engineer     We are looking for a skilled Project Engineer to join our team.  We have seen tremendous growth and need a BSME with CAD and 3D modeling to help our goals.  This position will report to the Engineering Manager.  You will be responsible for the technical aspects of projects to supple large capital food processing equipment to customers.  The Project Engineer acts as the customer's primary technical interface in conjuction with sales, project management, and the service group to ensure equipment meets expecations.  The Project Engineer leads teams of one to five skilled design engineers and provides guidance on component specification, equipment sizing, and detailed design specification. Job Responsibilities  - Design of industrial food processing and packaging equipment models in Autodesk Inventor 3D - Drafting of equipment layout/installation drawings, piping and instrumentation drawings, and process flow diagrams in AutoCAD 2D - Review of customer specifications, commercial documents, and internal standards documentation to determine scope of project supply - Organize and participate in peer review meetings to generate and review Risk Assessments - Sizing of mechanical and powertrain components (shafts, bearings, sprockets, gearboxes) - Sizing of heat transfer and fluid flow components (valves, pumps, burners, Heat Exchangers) - Specification of purchased components (sensors and switches) - Monitor design and customer drawing release schedules to ensure project is not delayed - Support equipment fabrication progress through our factory; we have a full machine shop, sheet metal shop with laser and waterjet, and welding assembly shop - Work with our field service group to support equipment installation, start-up, and commissioning - Mobility as required to review equipment during construction and during commissioning offsite - Occasional travel to customer facilities for meetings and equipment troubleshooting Required Education and Experience - BSME or B.S. in Food Engineering or related engineering field - 3+ years of CAD experience including 3-D modeling and drafting - Knowledge of design and manufacturability (DFM) - Experience in food processing equipment is a plus, but analytical ability is most important. - Experience working in SAP is preferred ***Veterans Are Encouraged to Apply***  

We have immediate hiring needs for Inspectors to join our U.S based Engineering Team! This position is a full-time permanent opportunity with excellent benefits, company vehicle and paid time off.  We specialize in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our  Inspection and Engineering Services personnel is focused on the beginning of the life cycle. - Services include: - Review and acceptance of Job Packages - In-process Inspections - Monitoring of Quality Control System - Witnessing final Hydrostatic Test - Review and signing of required forms This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently.  A successful inspector will have excellent communications skills and the ability to work with clients and customers in a professional manner with high integrity. Qualifications Required:   - Experience on High Pressure Boilers - Experience operating, maintaining, or inspecting boilers and pressure vessels. - ASME & NBIC Code Knowledge - Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications   State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with “A” Endorsement.     Preferred: - **Prior Navy Nuclear candidates are highly encouraged to apply** - Experience with boilers and pressure vessels.  - Risk Survey experience - N.B. of Boiler and Pressure Vessel Inspectors Commission  

We have immediate hiring needs for Inspectors to join our U.S based Engineering Team! This position is a full-time permanent opportunity with excellent benefits, company vehicle and paid time off.  We specialize in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our  Inspection and Engineering Services personnel is focused on the beginning of the life cycle. - Services include: - Review and acceptance of Job Packages - In-process Inspections - Monitoring of Quality Control System - Witnessing final Hydrostatic Test - Review and signing of required forms This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently.  A successful inspector will have excellent communications skills and the ability to work with clients and customers in a professional manner with high integrity. Qualifications Required:   - Experience on High Pressure Boilers - Experience operating, maintaining, or inspecting boilers and pressure vessels. - ASME & NBIC Code Knowledge - Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications   State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with “A” Endorsement.     Preferred: - **Prior Navy Nuclear candidates are highly encouraged to apply** - Experience with boilers and pressure vessels.  - Risk Survey experience - N.B. of Boiler and Pressure Vessel Inspectors Commission  

We have immediate hiring needs for Inspectors to join our U.S based Engineering Team! This position is a full-time permanent opportunity with excellent benefits, company vehicle and paid time off.  We specialize in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our  Inspection and Engineering Services personnel is focused on the beginning of the life cycle. - Services include: - Review and acceptance of Job Packages - In-process Inspections - Monitoring of Quality Control System - Witnessing final Hydrostatic Test - Review and signing of required forms This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently.  A successful inspector will have excellent communications skills and the ability to work with clients and customers in a professional manner with high integrity. Qualifications Required:   - Experience on High Pressure Boilers - Experience operating, maintaining, or inspecting boilers and pressure vessels. - ASME & NBIC Code Knowledge - Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications   State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with “A” Endorsement.     Preferred: - **Prior Navy Nuclear candidates are highly encouraged to apply** - Experience with boilers and pressure vessels.  - Risk Survey experience - N.B. of Boiler and Pressure Vessel Inspectors Commission  

We have immediate hiring needs for Inspectors to join our U.S based Engineering Team! This position is a full-time permanent opportunity with excellent benefits, company vehicle and paid time off.  We specialize in providing on location services that verify the quality and conformance of pressure equipment when it is being manufactured, erected and/or repaired. The work of our  Inspection and Engineering Services personnel is focused on the beginning of the life cycle. - Services include: - Review and acceptance of Job Packages - In-process Inspections - Monitoring of Quality Control System - Witnessing final Hydrostatic Test - Review and signing of required forms This field based position is an integral part of our commitment to the quality and service we provide for our customers and to their equipment. The work is varied from day to day and is ideally suited to a self-motivated individual who can work independently.  A successful inspector will have excellent communications skills and the ability to work with clients and customers in a professional manner with high integrity. Qualifications Required:   - Experience on High Pressure Boilers - Experience operating, maintaining, or inspecting boilers and pressure vessels. - ASME & NBIC Code Knowledge - Meet RCI-1 Requirements to qualify for AI/RI examinations and Commission qualifications   State Certificate of Competency and National Board of Boiler and Pressure Vessel Inspectors Commission, with “A” Endorsement.     Preferred: - **Prior Navy Nuclear candidates are highly encouraged to apply** - Experience with boilers and pressure vessels.  - Risk Survey experience - N.B. of Boiler and Pressure Vessel Inspectors Commission  

Immediate Hiring Need for a Mechanical Engineer    We are looking for a skilled Mechanical Engineer to join our team.  This position will report to the engineering manager and will work collaboratively with the applications engineering team.  You will be responsible for mechanical design of industrial equipment in the food and beverage industry.   Responsibilities: - Design mechanical assemblies and parts in SolidWorks - Develop BOMs  - Collaborate with the Application Engineering team with improvement projects - Use SolidWorks and other engineering software  - Customer service-understanding customer needs and developing engineering solutions - Continuous improvement mindset   Qualifications: - BSME or closely related field - 3+ years of experience designing industrial equipment - SolidWorks or other design software - Understanding of welding, machining, and sheet metal forming - Ability to work in a team environment   Not Required But Our Ideal Candidate Would Have: - Experience with conveyor systems  - Work within the food and beverage industry - Experience with automating workflows   Benefits: - 401K with employer match - PTO - Health, Dental, Vision Insurance   ***Veterans Are Encouraged to Apply***  

Immediate Hiring Need for a  Full TimeMaintenance Technician   We are looking for a skilled Maintenance Technician to join our team.  Your expertise will ensure the high performance and reliability of our manufacturing processes and equipment. You will also work closely with our customers to enhance the reliability and efficiency of our equipment in their operations.   Responsibilities: - Develop and implement reliability programs - Analyze data to predict maintenance needs  - Lead troubleshooting for equipment failures and recommend corrective actions - Provide technical guidance for equipment maintenance and improvements. - Conduct reliability training for maintenance personnel and customers - Travel to customer sites to develop customized reliability solutions.   Qualifications: - Bachelor's degree in Mechanical, Electrical, or Industrial Engineering - 5+ years experience in a manufacturing setting - Excellent problem-solving, troubleshooting, and analytical skills - Strong communication skills  - Willingness to travel as part of the role (25%)   Not Required But Our Ideal Candidate Would Have: - Military Experience - Experience working in the industrial food and beverage industry   Benefits: - 401K with employer matching - PTO - Health, Vision, Dental Insurance   ***Veterans Are Encourage to Apply***

Immediate Hiring Need for a  Full Time CNC Machinist   We are looking for a CNC Machinist to join our team. Our company has experienced rapid growth and we are looking to add someone who is ready to be a part of a leading company in industrial food service equipment.  Responsibilities: - Set up and operate CNC and NC machines and machining centers  - Fabricate stainless steel and nonmetallic parts - Read blueprints, drawings, specifications, and determine dimensions and tolerances of finished products - Use micrometers and veneer calipers - Use taps, endmills, and drills - Quality assurance of conformance of finished product to specifications Qualifications: - Effectively operate both Manual and CNC equipment - 2 years+ experience in a manufacturing environment  - Ability to read and understand blueprints and drawings Not Required but Our Ideal Candidate Would Have: - Ability to write programs  - Basic computer skills including ERP transactional experience - Trade,Technical School, or Military experience ***Veterans Are Encouraged to Apply***

Immediate Hiring Need Automation Field Service Technician $85K+ First Year with Excellent Benefits Plan     We are looking for a skilled Automation Field Service Technician to join our growing team.  You will need to have strong communication skills, mechanical, and electrical knowledge to troubleshoot, repair, and test complex technical problems on industrial automation systems for our customers.    RESPONSIBILITIES  - Troubleshoot electrical systems - Connect and install all safety switches, lights, and equipment - Assemble components to create one system - Installation of wiring and mechanical modifications - Troubleshoot mechanical systems - Train customers on operations and maintenance. - Prepare weekly expense reports and paperwork.   QUALIFICATIONS - Working knowledge of machining and manufacturing processes - Ability to use hand tools   Not Required but Our Ideal Candidate Would Have: - Associates or technical degree or military training - Press Brake or Wire Cutting - Experience with CNC Machining Equipment   Travel:  Monday-Friday(100%)   Pay:    $85K+ First year   Benefits:   401 K with employer match, Health, Dental, and Vision Insurance, Disability Insurance, PTO       ***VETERANS ARE ENCOURAGED TO APPLY***